Grid connected Wind Inverter

　

Product Introduction :

Small wind grid-connected system consists of wind generators, unloading device, and grid-connected inverter and distribution metering equipment composition.
When the wind speed is high enough, The AC power from the wind turbine via rectify, inverter and then fed into the power grid, when the wind speed is too large and makes the wind turbine run overloading, the unloading load part will be connected, to ensure constant power operation.

　

Product Advantages :

◆ High DC voltage input voltage

◆ DSP Chip Control

◆ Using Japanese the fifth generation Mitsubishi Intelligent Power Modules

◆ Maximum Power Point Tracking technology

◆ high efficiency

◆ Perfect protection and alarm functions

◆ In accordance with IEE929-2000 and UL1741 standard design

◆ Easy installation

◆ Via the LCD and buttons to set operating parameters.

　

Technique Parameter

Model	SRMW-1K	SRMW-3K	SRMW-5K
Rated Power output	1 KVA	3 KVA	5 KVA
Max. AC Power output	1.2KVA	3.6KVA	6KVA
isolation method	Power frequency transformer
Max. DC voltage	780VDC
MPPT Range	100~780VDC	150~780VDC	200~780VDC
Max.DC Current input	10A	20A	25A
Max. Efficiency	94%
Europe Efficiency	92%
Operating range utility voltage(1-P)	180~265VAC
Operating range utility frequency	50/60HZ±2%
Total Harmonic Distortion(THD)	<3%
Power factor	≥0.99
Internal consumption during stand-by	<10W
External interfaces	RS485/RS232
Isolation capability	1500Vac，1Minute
Operation surroundings tempeerature	-25~+60℃
Operation Surroundings Humidity	0~100%
Protection	Input overvoltage,output short circuit overload, overheat, output DC component.
Cooling system	Self air-cooled system
Noise	<40dB
Waterproof Class	IP20(in door)、IP65（out door）
L×W×H（mm）	300150500	350200500	400250500
Weight(kg)	10	45	60

Work Elements :

　

Model

Small Wind Inverter